Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Plantation Homeowners
A garage door that won’t open, opens crooked, or leaks around the frame needs more than a patch. When a door in Plantation is bent past straightening, rusted through at the bottom section, or paired with an opener that’s out of life, the practical answer is a new door measured and fitted for your opening. Our technicians have up to 15 years of experience and work on doors and openers as their only trade, so the assessment you get is from someone who sees these systems daily. We give you a free estimate with a written price before anything is ordered or installed. Call (833) 339-1248 to book a measure.
What Our Garage Door Installation Service Includes
Every installation starts with the opening itself, not a catalog page. We measure the rough opening, check the headroom and side room, look at how the door tracks back into the garage, and confirm what your opener can safely lift. That measurement decides which of the sub-services below actually fits your situation.
New Door Installation
New door installation is the full job: removing the old door and hardware, preparing the opening, setting new tracks and springs, hanging the panels, and balancing the door so it lifts with hand pressure and stays where you leave it. You need this when a door is structurally compromised, when the sections no longer line up, or when the existing door is simply at the end of its service life. We handle the selection through to the finished, tested door, including the opener side if your existing unit can’t handle the new weight.

Single Car Door
A single car door is the nine-by-seven-foot opening most Plantation garages have on the main bay, and it’s the size where panel weight and spring tension matter most for smooth daily operation. You need one when a single bay’s door is dented, sagging, or so badly out of square that the rollers bind. We size the springs to the actual door weight rather than a chart guess, which is the difference between a door that lasts and one that eats springs.

Double Car Door
A double car door spans roughly sixteen feet, and at that width the door flexes more and depends on a properly matched pair of springs and a solid center bearing plate. Homeowners need this when a wide door starts bowing in the middle, when one side lifts before the other, or when a replacement is in order after damage across several sections. We check the header and jamb for sag before we hang anything, because a wide door on a weak header will never track cleanly. The torsion system gets set and tested with the door disconnected first.

Custom Garage Door
A custom door is built to a non-standard opening size, a specific panel profile, or a look that matches the house rather than the neighborhood default. You need this on older Plantation homes with unusual opening dimensions, or when an addition changed the garage face. We measure, specify, and source the door through brands we know well, including Amarr and Wayne Dalton, then install and balance it to the same standard as a stock door.
Steel Doors
Steel is the most common door material in South Florida because it holds up to humidity, takes paint cleanly, and insulates well when you choose a door with a filled core. A steel door is the right call when you want low upkeep and a clean, flat panel look, and you need one when the old door has rusted at the bottom edge where water sits. We help you pick the gauge and insulation level that fits how you use the garage, then install it with hardware matched to the door’s weight.
Wood Doors
Wood doors give you a look steel can’t match: real grain, custom stain, and a carriage-house feel that suits certain Plantation homes. You need one when curb appeal is the priority and you’re willing to keep up with occasional refinishing, since wood moves with humidity and needs a fresh finish to stay sound. We source wood doors through brands like Raynor, confirm the door is properly sealed before it goes up, and balance the heavier panels with springs sized for the extra weight.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work with the door and opener brands that are actually installed in Plantation neighborhoods, which means we’re not learning your system on your job. Amarr doors are built around a solid panel design and a straightforward track system, and we know how their sections seat and where the hardware tends to loosen over time. Wayne Dalton doors often come with their own torsion setup, and we’re familiar with how those systems should be tensioned and adjusted. On the opener side, we work with LiftMaster and Chamberlain units regularly and understand their travel limits, force settings, and safety-reverse behavior, so a new door and an existing opener get paired correctly instead of fighting each other.
We also service Craftsman and Genie openers, plus Clopay and Raynor doors, and we handle each brand’s actual components rather than applying a generic fix. That matters most at the point where a new door meets an existing opener: the door’s weight and balance have to match what the opener can safely move, and the safety reverse has to be tested and set correctly. Whether you have Amarr, Wayne Dalton, or any other make, we can help you choose, source, and install the right door.
Signs You Need Garage Door Installation Right Now
- The door is bent or buckled across a section. A creased panel weakens the whole door and puts uneven load on the springs and tracks. Once a section is structurally bent, replacement is usually the safer path than repair.
- The door hangs crooked or binds in the tracks. If one side rises before the other or the door jams partway up, the door or its hardware has gone out of square. That binding strains the opener and can burn it out if you keep running it.
- Rust or rot has eaten the bottom section. The bottom panel takes the brunt of rain splash, and once it’s compromised the door loses strength and lets water in. This is common on older steel and wood doors in Plantation’s humidity.
- The opener strains or the door is too heavy for it. A door that needs a shove to get moving, or an opener that groans and reverses, signals a weight and balance problem. A new door sized to your opener, or a matched opener upgrade, solves it properly.
- You’re remodeling or the door no longer matches the house. A dated or mismatched door drags down the whole front of the home. When the look and the function both need to change, installation is the straightforward answer.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and assessment. We measure the rough opening, check headroom, side room, and how the door tracks back, and inspect the header and jambs. You get a written price before anything is ordered, and we talk through door options that actually fit your opening.
- 2
Door selection and sourcing. We help you choose material, insulation, and panel style from brands we know, including Amarr, Wayne Dalton, Raynor, and Clopay. The door is ordered to your exact measurements so it arrives ready to install.
- 3
Removal and opening prep. On install day we take down the old door and hardware and check the opening for square and soundness. Any frame or header issue gets addressed before new tracks go up, not after.
- 4
Install and balance. We set the new tracks, hang the panels, and install and tension the spring system to the door’s actual weight. The door is tested by hand first, disconnected from the opener, to confirm it’s balanced and tracks smoothly.
- 5
Opener setup and safety test. We reconnect or install the opener, set the travel limits and force, and test the safety reverse. You get a walkthrough of operation and the door is left working the way it should before we pack up.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Plantation?
Garage door installation in Plantation typically runs $700 – $2,200 for a standard new door, depending on size, material, and insulation. A single car door usually lands toward the lower end of that range, while a double car door, a custom size, or a wood door with a premium finish pushes toward the top. If your existing opener can’t handle the new door, add opener installation at a typical $250 – $550. A custom door with non-standard dimensions can run higher still, which is why the measure comes first and the written estimate sets the final price.
What affects the price is straightforward: door size, material (steel versus wood), insulation level, whether the opening needs any prep work, and whether an opener is part of the job. To avoid overpaying, get the opening measured rather than estimated over the phone, and ask what’s included in the quote: removal, disposal, new hardware, spring sizing, and opener setup should all be spelled out. Our free estimate covers the measure, the door options that fit, and a written price agreed before any work starts, so there’s no surprise on the invoice. Call (833) 339-1248 for an exact quote – estimates are free.
Garage Door Installation Near Plantation – Our Service Area
We work throughout Plantation and the surrounding communities, including Sunrise, Lauderhill, Davie, Broadview Park, Lauderdale Lakes, Washington Park, Boulevard Gardens, Roosevelt Gardens, and Franklin Park. Installation is a scheduled job rather than an emergency call, so we book your measure and install around your availability, and nearby cities are easy to fit into the schedule. If you’re in one of these areas, the process is the same: free measure, written price, then installation. You can also see our garage door installation page for the Sunrise area, or our garage door installation page for Lauderhill.
Serving Plantation, FL – Our Local Coverage Area
We serve Plantation and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Plantation
Garage door installation is the full replacement of a garage door and its hardware, including tracks, springs, and rollers, sized and balanced for your specific opening. It covers removal of the old door, preparation of the opening, hanging and balancing the new door, and setting up the opener if one is involved. It’s different from repair, which fixes a specific failed part on an existing door.
A standard single or double car door installation usually takes a few hours once the door is on site. The timeline starts earlier with the measure and the order, since the door is built to your opening and has to arrive before install day. Custom sizes and wood doors can add lead time, which we’ll confirm when you get your written estimate.
Typical installation runs $700 – $2,200 depending on door size, material, and insulation, with opener installation adding a typical $250 – $550 if needed. A single car door sits toward the lower end, while a double car, custom, or wood door runs higher. The written estimate sets the final price, and it’s quoted before any work starts. Call (833) 339-1248 for an exact quote – estimates are free.
Yes, we service Amarr and Wayne Dalton doors, along with Clopay, Raynor, and other major brands. We’re familiar with how these doors are built and how their hardware and spring systems should be set up. When you’re choosing a new door, we’ll help you pick from brands we know well so the install goes cleanly.
If a door fails and you can’t secure the garage, call us at (833) 339-1248 and we’ll work to get someone out as soon as we can. For a door that’s stuck open, don’t try to force it or handle the springs yourself; those are under high tension and can cause serious injury. We’ll assess whether it’s a repair or a replacement and give you a written price before work starts.
Warranty terms depend on the door brand and the specific work done, so we confirm the coverage in writing with your estimate. Manufacturer warranties on the door and hardware are separate from our workmanship, and we walk you through both before you commit. Ask about warranty details when you call and we’ll spell out exactly what’s covered.
Clear the garage floor and the area in front of the door so the technicians have room to work and set down panels. Move cars out of the driveway and anything fragile away from the tracks and ceiling where the opener sits. If you have questions about the opener or want to discuss options, have those ready when we arrive.
Schedule Your Garage Door Installation Service in Plantation Today
If your door is bent, rusted, or just ready for a change, we’ll measure your opening, walk you through the door options that fit, and give you a written price before anything is ordered. Our technicians work on doors and openers as their only trade, and we handle everything from spring to opener. Call (833) 339-1248 today for a free, no-obligation estimate, and let’s get your new door measured and scheduled. You can also start with our Plantation Garage Door Repair Co home page or learn more about garage door installation.
Written by the team at Plantation Garage Door Repair Co.